5X series sand making machine
long lasting
The alloy wear-resistant block is made of highly wear-resistant and high-temperature resistant materials used in important industries in the United States, and has a longer service life;
Large output
The new impeller design optimizes material flow and increases production by 30%;
Easy to adjust the discharging size
The height of the material distribution plate at the feed inlet can be adjusted to control the feed amount and the ratio of the feed entering vertically into the impeller and the feed distributed around the impeller, so as to adjust the proportion of the discharge particle size.
Strong controllability
Thin oil lubrication solution provides a wider speed range.
Technical Parameters
|
model |
5X7615 |
5X8522 |
5X9532 |
5X1145 |
|||
|
Output (t/h) |
Cascade and center feed |
150~280 |
240～380 |
350～540 |
500～640 |
||
|
Full center feed |
|||||||
|
70~140 |
120~200 |
180~280 |
250~360 |
||||
|
Maximum feeding size (mm)
|
Soft material |
<35 |
<40 |
<45 |
<50 |
||
|
Hard material |
<30 |
<35 |
<40 |
<45 |
|||
|
Speed (r/min) |
1700~1900 |
1500~1700 |
1300~1510 |
1100~1310 |
|||
|
Dual motor power (kW) |
150 |
220 |
320 |
440 |
|||
|
Maximum dimensions Length x Width x Height (mm) |
4100×2300×2300 |
4140×2500×2700 |
4560×2600×2900 |
5100×2790×3320 |
|||
|
power supply |
380V，50Hz |
||||||
|
Dual oil pump motor power (kW) |
2x0.31 |
||||||
|
Thin oil lubrication station |
safety protection |
Double oil pumps complement each other to ensure oil supply; the machine will automatically shut down if there is no oil flow or oil pressure; |
|||||
|
Air (water) cooling; motor heating start in winter. |
|||||||
| Fuel tank heater power (kW) |
2 |
||||||